TDK Corporation is a leading electronics company based in Tokyo, Japan. It was established in 1935 to commercialize ferrite, a key material in electronic and magnetic products. TDK's portfolio includes passive components, such as ceramic, aluminum electrolytic and film capacitors, ferrites and inductors, high-frequency products, and piezo and protection components, as well as sensors and sensor systems and power supplies. These products are marketed under the product brands TDK, EPCOS, InvenSense, Micronas, Tronics and TDK-Lambda. TDK's further main product groups include magnetic application products, energy devices, and flash memory application devices. TDK focuses on demanding markets in the areas of information and communication technology and automotive, industrial and consumer electronics.
TDK InvenSense ICM-42370-P High Performance 3-Axis Accelerometer
TDK InvenSense ICM-42370-P High-Performance 3-Axis Accelerometer is a high-performance MEMS MotionTracking device in a 2.5mm x 3mm x 0.76mm 14-pin LGA package. This accelerometer includes a configurable host that supports I3CSM, I2C, and SPI serial communication. The ICM-42370-P accelerometer consists of two programmable interrupts with ultra-low-power wake-on-motion, up to 2.25Kbytes of FIFO, and 3.5µA sleep mode current consumption. This 3-axis accelerometer supports low accelerometer sensor noise that includes high stability against temperature, shock (up to 20,000g), SMT/bend-induced offset, and immunity against out-of-band vibration-induced noise. Typical applications include cameras, appliances, and consumer and medical wearables (IoT).
FEATURES
- 0.20mA low-noise mode current consumption
- 3.5µA sleep mode current consumption
- ±2g/±4g/±8g/±16g digital-output X-, Y-, and Z-axis accelerometer with programmable full-scale range
- High accel sensitivity with 16-bit ADC
- APEX motion functions:
- Pedometer
- Tilt detection
- Low-g detection
- Freefall detection
- Wake on motion
- Significant motion detection
- Host interface:
- 12.5MHz I3CSM
- 1MHz I2C
- 24MHz SPI
- 20,000g shock tolerant
- Low-power mode support for always-on experience
- User-programmable digital filters for accel and temp sensor
- MEMS structure is hermetically sealed and bonded at a wafer level
- 2.5mm x 3mm x 0.76mm 14-pin LGA package
- RoHS and Green-compliant
APPLICATIONS
- Home/industrial appliances
- Security cameras/dash cam
- Premium IoT/medical wearables
BLOCK DIAGRAM
